Atara

menu mobile hamburger

Specific FDES

Our solutions

ATARA draws up specific -that covers a single commercial reference- FDES for all your construction products, based on the NF EN 15804+A2 standard and its national complement.

ATARA has developed the most comprehensive and competitive solution on the market.

ATARA relies on solid human expertise and the use of Augmented Intelligence tools developed by our R&D department.

What is an FDES?

Drawing up an FDES (Environmental and Safety Declaration Sheet) is governed by standard NF EN 15804+A2 and its national complement.

This declaration, drawn up under the responsibility of the manufacturers
is based on the results of the Life Cycle Assessment of their product.

It summarizes the characteristics of a product for all phases of its life cycle :

A1- Raw materials
A2- Raw materials transportation
A3- Production
A4- Transporting the product to the installation site
A5- Implementation
B1 to B7- Processing
C1 to C4- End of life

Graph ACV

FDESs can be : 

     > Individual when they concern a single manufacturer.

     > Collective when they concern several manufacturers.

French regulations require environmental declarations to be verified by an independent third party.

The list of accredited auditors for the Inies program is available at: https: //www.inies.fr/ressource/liste-des-verificateurs-habilites-au-programme-inies/

What about a specific FDES?

An FDES is said to be specific when it covers a single product (a single commercial reference).

How does it work?

T0

Technical and Financial Proposal (TFP)

The date of receipt of the PTF accepted by you is considered to be the T0 day from which the following deadlines derive.

1

Kick-off meeting

Delay: T0 ± 1 week
2

Intermediate meeting

Delay: T0 ± 9 weeks
3

Feedback meeting

Delay: T0 ± 12 weeks
4

Verification assistance

5

Inies registration assistance

6

Updates

What are our deadlines?

FDES sheets are delivered within 12 to 14 weeks of acceptance of our quotation.

Why choose us?

They trust us

Technical and Financial Proposal (TFP)

Terms and conditions


We :

After collecting and analyzing the available data on your products (technical data sheets, installation instructions, applicable DTUs, etc.) and analyzing your needs, we send you a Technical and Financial proposal.

Deliverables

PTF

Delay

Proposals are usually sent within 8 days.

Rates

From €5,000 excl.

Our prices are among the most competitive on the market, and depend on the number of production sites, the number of raw materials used in your products, the number of suppliers, the complexity of your processes, etc.

Kick-off meeting

Organization and animation

ATARA

Duration

1h00 to 2h00.

Meeting procedure

Objective


You :

Signature NDA.

Detailed presentation of your product and production process.

We :

Signature NDA.

Preparation and presentation of the data collection form.

Deliverables

Meeting minutes.

Data collection form.

List of parts to be collected.

Intermediate meeting

Organization and animation

ATARA

Duration

1h00 to 1h30.

Meeting procedure

Objective


You :

If applicable, additional information and details.

We :

Presentation of the Life Cycle Inventory.
Presentation of the FDES v0.9

Deliverables

Meeting minutes.

FDES v0.9

Feedback meeting

Organizer

ATARA

Duration

1h to 1h30

Terms and conditions

Videoconferencing

Objectives

We :

Presentation of the FDES v1.0

Presentation of independent third-party verification operations

Deliverables

FDES v1.0

LCA report

Sending the EHDS for verification

Independent third-party verification assistance

Organizer

ATARA

Duration

2 to 3 weeks

Objective

You :

Choice of auditor : We recommend that you initiate the process as soon as the file is opened, and can refer you to the auditors we usually work with.

We :

Full audit assistance service : we handle all exchanges with the auditor and respond to any observations.

This continues until the verification certificate and verification report are issued.

Assistance with registration on the Inies database

Course

You :

Open an Inies declarant account and obtain a registration number for your product. The operation takes just a few minutes.

We :

Supply of an xml exchange file enabling data to be exported to the Inies database site.

Screen-sharing support for product registration on the Inies database.

Duration

Data validation by the Inies database administrator generally takes 5 to 15 days.

Maintenance and updates

Your processes evolve

We integrate changes and keep your EHDSs up to date

Deliverables

FDES v1.x